Shift Code - Leibinger JET3 User Manual

Group 8

8.7.4 Shift code

Provides the integration of a text element which is printed in predefined periods
(shift times) as well as a definition of the accordant parameters.
Note: The changing text can be also combined with other printing elements which
will not change by the predefined periods (only the „shift-defined" text).
Proceeding:
Example: A shift code should be written additionally to an existing fix text „xxx".
In the first shift (early shift) at 6.15 am „xxx 001".
In the second shift (late shift) at 12.15 pm „xxx 002".
In the third shift (night shift) at 20.15 am „xxx 003".
Press the button <Insert> (1) and the option <Shift Code> (2) or the
accordant direct button [icon] (3).
The menu <Object settings (Shift Code)> (4) is faded in.
In the functional area <Global Settings> (5) carry out the requested settings for
the font parameters and display options. You will find further information in the
Chapter Object Settings.
Note: In the setting fields <Position X/Y> (6) the system shows automatically
the next possible position of the shift code after the already existing fix
text. This position can be of course changed!
Now change to the functional area <Shift Code> (7). The selection of the
functional area happens by clicking on the accordant register card (15).
Now mark in the setting fields <Shift Times> (8) the hour- or minute block to
change the values. With the accordant <Arrow buttons> (9) you can increase
or reduce the values of the marked block (16).
Now click in the first setting field <Shiftcode> (10). A keyboard field opens for
input. Now enter „001".
Press the button <Enter> (11) of the keyboard field. The entered characters are
taken over and are displayed in the setting field.
Release R1.03e
You will find further information regarding the working with
keyboard fields in the chapter Keyboard fields!
Job editor Page 201
LEIBINGER JET3