Available Inks (All Types Of The High Speed Series); Ink Selection Of The High Speed Line - Leibinger JET Rapid Operating Manual

4 Available inks (All types of the High Speed series)

For technical reason it is not possible to use the full range of LEIBINGER inks for high-speed
printing. The selection of the available inks depends on the used RAPID type and the nozzle
size.
So there are only specific ink types tested and approved for the High Speed series.
When you adjust a not tested ink in the hydraulic menu, no default settings were
displayed there.
Attention

Using an ink that is not approved for high-speed printing may result in printouts
of dissatisfying quality!

Additionally an ink that is not approved may cause serious issues by ink
contaminations of the print head!

4.1 Ink selection of the High Speed Line

The following tables show the inks available (February 2018)
JET Rapid Wire
Ink JET Rapid Wire
Stepped head cover
70-030
70-031
70-101
70-106
70-126
70-134
72-102
76-101
JET Rapid Wire PI
Ink JET Rapid Wire PI
Stepped head cover
70-120
74-111
76-121
79-106
79-119
79-122
Release R.1.02
50μm



*)




60μm
*)





JET Rapid Wire
Beveled head cover
50μm





JET Rapid Wire PI
Beveled head cover
60μm
*)





Page 21



High Speed Line