Selection Of A User; Definition Of Password; Figure 66 Selection Of Users - Leibinger JET3 up Operating Manual

Page 160

7.3.5.1.1 Selection of a user

With the drop-down list <User> (1) a user is selected.
Figure 66 Selection of users
1 – Drop-down list <User>

7.3.5.1.2 Definition of password

The password for the currently selected user can be enterd in the input field
<Password> (1). A password already set will displayed in the input filed and can
be overwritten if necessary.
Proceeding:
Example: The password „Leibinger" shall be defined for user 1.
 Click in the input field <Password> (1). A keyboard (3) pops up for input.
You will find further information regarding the operation with
keyboard in the chapter 6.4.1 Keyboard
 Enter the password „Leibinger". The input is displayed in the input field
<Password> (1).
 Press the button <Enter> (4) of the keyboard field to finish the input.
 Now press the button <set...> (2) to take over the entered password.
In order to complete the setting of the password the dialog box has to
be closed with the <OK>button (5)!
In order to discard all changes close the dialog box with a click on the
<Cancel> button (6).
Release R1.06
Job Editor
1
INFORMATION
ATTENTION
Group 8
JET3up