Allow Remote Access For Web Administration And Ssh - Digi IX40 User Manual

Services

Allow remote access for web administration and SSH

By default, only devices connected to the IX40's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
n The IX40 device must have a publicly reachable IP address.
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See Set the idle timeout for IX40 users
n
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
IX40 User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity timeout for
Use Digi Remote Manager to view and manage your
510