Services
Allow remote access for web administration and SSH
By default, only devices connected to the IX20's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
The IX20 device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See
Set the idle timeout for IX20 users
n
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
IX20 User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity timeout for
404