Allow Remote Access For Web Administration And Ssh - Digi IX14 User Manual

Services

Allow remote access for web administration and SSH

By default, only devices connected to the IX14's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
The IX14 device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See Set the idle timeout for IX14 users
n
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
IX14 User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity timeout for
317