Trace:write:reading - Keithley DMM7510 Reference Manual

7 1/2 digit graphical sampling multimeter
Hide thumbs Also See for DMM7510:
Table of Contents

Advertisement

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

:TRACe:WRITe:READing

This command allows you to write readings into the reading buffer.
Type
Command only
Usage
For buffers with the writable buffer style:
:TRACe:WRITe:READing "<bufferName>", <readingValue>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>, <fractionalSeconds>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>,
<fractionalSeconds>, <status>
For buffers with the full writable buffer style:
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>,
<fractionalSeconds>
:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>,
<fractionalSeconds>, <status>
<bufferName>
<readingValue>
<extraValue>
<seconds>
<fractionalSeconds>
<status>
Details
This command writes the data you specify into a reading buffer. The reading buffer must be set to the
writable or full writable style, which is set when you make the buffer.
Data must be added in chronological order. If the time is not specified for a reading, it is set to one
integer second after the last reading. As you write the data, the front-panel Home screen updates and
displays the reading you entered.
DMM7510-901-01 Rev. B / May 2015
Affected by
Not applicable
A user-supplied string that indicates the name of the buffer
The first value that is recorded in the buffer index
A second value that is recorded in the buffer index (only valid for buffer style
FULLWRITable)
An integer that represents the seconds
The portion of time that represents the fractional seconds
The reading that is the start of a group of readings:
buffer.STAT_START_GROUP; set to 256 to graph a family of curves (default
is 0)
Section 6: SCPI command reference
Where saved
Not applicable
Default value
Not applicable
6-175

Advertisement

Table of Contents
loading

Table of Contents