Keithley DMM7510 Reference Manual page 44

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Measure view area
The Measure view area of the Home screen displays the value of the present measurement and other
measurement information.
The Range button on the lower left displays the presently selected measure range. Select the button
to change the range.
The indicators on the right edge of the Measure view area show any measure settings that affect the
displayed measurement value. The indicators and what they mean are defined in the following table.
DMM7510-901-01 Rev. B / May 2015
Figure 13: Measure view area of the home screen
Indicator Meaning
10MΩ Input impedance is set to 10 MΩ
ACCPL AC signal coupling is enabled
Input impedance is set to automatic
AUTOΩ
AZERO Instrument automatically retrieves reference values
DCCPL DC signal coupling is enabled
DRYCR Dry circuit ohms is enabled
FILT A filter is applied to the measurement
L1FAIL Limit test one is enabled and measurement failed
L1PASS Limit test one is enabled and measurement passed
L2FAIL Limit test two is enabled and measurement failed
L2PASS Limit test two is enabled and measurement passed
MATH A percent, mx+b, or reciprocal calculation is applied
OCMP Offset compensation is enabled
OLEAD Open lead detection is enabled
REL Relative offset is applied
SIMJC The thermocouple reference junction is simulated
Section 2: General operation
2-17