Trigger:timer<N>:Delay; Trigger:timer<N>:Start:fractional - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
:TRIGger:TIMer<n>:DELay
This command sets and reads the timer delay.
Type
Command and query
Usage
:TRIGger:TIMer<n>:DELay <interval>
:TRIGger:TIMer<n>:DELay?
<n>
<interval>
Details
Each time the timer is triggered, it uses this delay period.
Reading this command returns the delay interval that will be used the next time the timer is triggered.
Example
TRIG:TIM2:DEL 50E-6
Also see
None
:TRIGger:TIMer<n>:STARt:FRACtional
This command configures an alarm or a time in the future when the timer will start.
Type
Command and query
Usage
:TRIGger:TIMer<n>:STARt:FRACtional <time>
:TRIGger:TIMer<n>:STARt:FRACtional?
<n>
<time>
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
Trigger timer number (1 to 4)
Delay interval (8e-6 s to 100,000 s)
Affected by
Recall settings
Instrument reset
Power cycle
Trigger timer number (1 to 4)
The time in fractional seconds (0 to < 1 s)
Section 6: SCPI command reference
Where saved
Save settings
Set trigger timer 2 to delay for 50 µs.
Where saved
Save settings
Default value
10e-6 (10 µs)
Default value
0
6-237