Trigger Menu - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

Trigger menu

The menus under Trigger in the main menu allow you to configure triggering operations from the
Model DMM7510 front panel. The following topics describe the settings that are available on these
interactive screens.
Trigger Templates menu
You can also customize the templates from the front panel using the Configure menu under Trigger
on the main menu screen. For details, see
The table below describes the trigger model templates and available user-specified settings.
Setting
Empty
ConfigList
LogicTrigger
SimpleLoop
DurationLoop
LoopUntilEvent
GradeBinning
SortBinning
Keithley2001
DMM7510-901-01 Rev. B / May 2015
The Templates menu allows you to choose from one of several
preprogrammed trigger models. When you select a template, settings you
can specify for that template are shown in the lower part of the screen.
Description
Clears the present trigger model.
Creates a trigger model that loads a configuration list. At each configuration list
index, a measurement is made. The list is iterated until every index in the
configuration list has been loaded.
Creates a trigger model that waits on an input line, delays, makes a measurement,
and sends out a trigger on the output line a specified number of times.
Creates a trigger model that sets up a loop that sets a delay, makes a
measurement, and then repeats the loop the number of times you define in the
count parameter.
Creates a trigger model that makes continuous measurements for a specified
amount of time.
Creates a trigger model that makes continuous measurements until a specified
event occurs.
Creates a trigger model that successively measures components and compares
their readings to high or low limits to grade components.
Creates a trigger model that successively measures components and compares
their readings to high or low limits to sort components.
Creates a multi-layer trigger model that emulates the Keithley Instrument Model
2001 trigger model.
Trigger Configure menu
Section 2: General operation
(on page 2-46).
2-45