[:Sense[1]]:Digitize:function[:On] - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

[:SENSe[1]]:DIGitize:FUNCtion[:ON]

This command selects which digitize function is active.
Type
Command and query
Usage
[:SENSe[1]]:DIGitize:FUNCtion[:ON] "<function>"
[:SENSe[1]]:DIGitize:FUNCtion[:ON]?
<function>
Details
Set this command to the type of measurement you want to digitize.
Reading this command returns the digitize function that is presently active.
If you send the query when a measurement function is selected, the query returns NONE.
If a basic (non-digitize) measurement function is selected, this returns NONE. The none setting is
automatically made if you select a function with [:SENSe[1]]:FUNCtion[:ON] or through the
options from the front-panel Measure Functions tab.
Example
DIG:FUNC "VOLTage"
Also see
[:SENSe[1]]:FUNCtion[:ON]
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
Measure configuration list
A string that contains the measurement function to make active:
•
Current: CURRent
•
Voltage: VOLTage
Make the digitize voltage function the active function.
(on page 6-124)
Section 6: SCPI command reference
Where saved
Save settings
Measure configuration list
Default value
NONE
6-123