Trace:statistics:clear - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Example
TRACe:STAT:AVERage?
TRACe:STAT:AVERage? "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE

:TRACe:STATistics:CLEar

:TRACe:STATistics:MAXimum?
:TRACe:STATistics:MINimum?
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:STDDev?
:TRACe:STATistics:CLEar
This command clears the statistical information associated with the specified buffer.
Type
Command only
Usage
:TRACe:STATistics:CLEar
:TRACe:STATistics:CLEar "<bufferName>"
<bufferName>
Details
This command clears the statistics without clearing the readings.
Example
TRACe:STATistics:CLEar
TRACe:STATistics:CLEar "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE
:TRACe:STATistics:AVERage?
:TRACe:STATistics:MAXimum?
:TRACe:STATistics:MINimum?
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:STDDev?
DMM7510-901-01 Rev. B / May 2015
(on page 3-13)
(on page 3-30)
(on page 6-160)
(on page 6-167)
(on page 6-168)
(on page 6-169)
(on page 6-170)
(on page 6-170)
Affected by
Not applicable
The name of the reading buffer, which may be a default buffer
(defbuffer1 or defbuffer2) or a user-defined buffer; if no buffer is
defined, clears the statistics from defbuffer1
(on page 3-13)
(on page 3-30)
(on page 6-160)
(on page 6-166)
(on page 6-168)
(on page 6-169)
(on page 6-170)
(on page 6-170)
Section 6: SCPI command reference
Returns the average reading for the readings in the default
buffer defbuffer1.
Returns the average reading for the readings in the user-
defined buffer testData.
Where saved
Not applicable
Clear all statistics in defbuffer1.
Clears all statistics in a user-defined buffer
named testData.
Default value
Not applicable
6-167