Trigger.lanout[N].Logic; Trigger.lanout[N].Protocol - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

trigger.lanout[N].logic

This attribute sets the logic on which the trigger event detector and the output trigger generator operate on the
given trigger line.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
logicType = trigger.lanout[N].logic
trigger.lanout[N].logic = logicType
logicType
N
Example
trigger.lanout[2].logic = trigger.LOGIC_POSITIVE
Also see
None

trigger.lanout[N].protocol

This attribute sets the LAN protocol to use for sending trigger messages.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
protocol = trigger.lanout[N].protocol
trigger.lanout[N].protocol = protocol
protocol
N
DMM7510-901-01 Rev. B / May 2015
Affected by Where saved
Restore configuration Configuration script
Instrument reset
Power cycle
The type of logic:
•
Positive: trigger.LOGIC_POSITIVE
•
Negative: trigger.LOGIC_NEGATIVE
The LAN event number (1 to 8)
Affected by Where saved
Restore configuration Configuration script
Instrument reset
Power cycle
The protocol to use for messages from the trigger:
•
lan.PROTOCOL_TCP
•
lan.PROTOCOL_UDP
•
lan.PROTOCOL_MULTICAST
The LAN event number (1 to 8)
Section 8: TSP command reference
Default value
trigger.LOGIC_NEGATIVE
Set the logic for LAN trigger line 2 to
positive.
Default value
lan.PROTOCOL_TCP
8-281