Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
tspnet.tsp.abort()
This function causes the TSP-enabled instrument to stop executing any of the commands that were sent to it.
Type
TSP-Link accessible
Function
No
Usage
tspnet.tsp.abort(connectionID)
connectionID
Details
This function is appropriate only for TSP-enabled instruments.
Sends an abort command to the remote instrument.
Example
tspnet.tsp.abort(testConnection)
Also see
None
tspnet.tsp.abortonconnect
This attribute contains the setting for abort on connect to a TSP-enabled instrument.
Type
TSP-Link accessible
Attribute (RW)
No
Usage
tspnet.tsp.abortonconnect = value
value = tspnet.tsp.abortonconnect
value
DMM7510-901-01 Rev. B / May 2015
Affected by
Where saved
Integer value used as a handle for other tspnet commands
Stops remote instrument execution on testConnection.
Affected by
Restore configuration
Instrument reset
Power cycle
•
Enable: 1
•
Disable: 0
Section 8: TSP command reference
Default value
Where saved
Configuration script
Default value
1 (enable)
8-361