Keithley DMM7510 Reference Manual page 32

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
1588 LED indicator
1588 functionality is not supported at this time. This functionality will be made available with a
firmware update. See the Model DMM7510 Release Notes on the
(http://www.keithley.com) for details.
SENSE terminals
INPUT terminals
FRONT/REAR
TERMINALS switch
AMPS
DMM7510-901-01 Rev. B / May 2015
Illuminates when the instrument is connected to an IEEE-1588
compliant device.
Use the SENSE HI and SENSE LO terminals and the INPUT
terminals with the 4-wire resistance, 3-wire and 4-wire RTD
temperature, and DC voltage ratio functions.
Use the INPUT HI and INPUT LO terminals for all measurements
except current.
Activates the terminals on the front or rear panel. When the
front-panel terminals are active, a green "F" is visible to the left of
the FRONT/REAR switch. When the rear-panel terminals are
active, a yellow "R" is visible to the left of the switch.
Use the AMPS connection with the INPUT LO terminal to measure
≤3A DC or AC
current.
rms
Section 2: General operation
Keithley Instruments website
2-5