Localnode.linefreq; Localnode.model - Keithley DMM7510 Reference Manual

Section 8: TSP command reference

localnode.linefreq

This attribute contains the power line frequency setting that is used for NPLC calculations.
Type TSP-Link accessible
Attribute (R) Yes
Usage
frequency = localnode.linefreq
frequency
Details
The instrument automatically detects the power line frequency (either 50 Hz or 60 Hz) when the
instrument is powered on.
Example
frequency = localnode.linefreq
print(frequency)
Also see
None

localnode.model

This attribute stores the model number.
Type TSP-Link accessible
Attribute (R) Yes
Usage
model = localnode.model
model
Example
print(localnode.model)
Also see
localnode.serialno
8-222
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Affected by
Power cycle
The detected line frequency: 50 or 60
Affected by
Not applicable
The model number of the instrument
(on page 8-225)
Where saved
Not applicable
Reads line frequency setting.
Where saved
Not applicable
Outputs the model number of the local node. For example:
DMM7510
Default value
Not applicable
Default value
Not applicable
DMM7510-901-01 Rev. B / May 2015