[:Sense[1]]:<Function>:Rtd:delta; [:Sense[1]]:<Function>:Rtd:four; [:Sense[1]]:<Function>:Rtd:three - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
[:SENSe[1]]:<function>:RTD:DELTa
This command contains the delta value of a user-defined RTD.
Type
Command and query
Usage
[:SENSe[1]]:<function>:RTD:DELTa <n>
[:SENSe[1]]:<function>:RTD:DELTa DEFault
[:SENSe[1]]:<function>:RTD:DELTa MINimum
[:SENSe[1]]:<function>:RTD:DELTa MAXimum
[:SENSe[1]]:<function>:RTD:DELTa?
[:SENSe[1]]:<function>:RTD:DELTa? DEFault
[:SENSe[1]]:<function>:RTD:DELTa? MINimum
[:SENSe[1]]:<function>:RTD:DELTa? MAXimum
<function>
<n>
Functions
VOLTage[:DC]
VOLTage:AC
CURRent[:DC]
CURRent:AC
Details
This attribute is only valid when:
•
The function is set to temperature.
•
The transducer type is set to 3 or 4-wire RTD.
•
The RTD type is set to user-defined.
Example
:FUNC "TEMP"
:TEMP:TRANsducer TRTD
:TEMP:RTD:THR USER
:TEMP:RTD:ALPH .005
:TEMP:RTD:DELT .00385
:TEMP:RTD:ZERO 120
Also see
[:SENSe[1]]:<function>:RTD:FOUR
[:SENSe[1]]:<function>:RTD:THRee
[:SENSe[1]]:<function>:TRANsducer
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
Measure configuration list
The function to which the setting applies; see Functions
0 to 5
RESistance
FRESistance
DIODe
CAPacitance
(on page 6-100)
(on page 6-101)
(on page 6-112)
Where saved
Save settings
Measure configuration list
TEMPerature
CONTinuity
FREQuency[:VOLTage]
PERiod[:VOLTage]
Set the measure function to temperature.
Set the transducer type to 3-wire RTD.
Set the RTD type to User.
Set the alpha RTD value to 0.005.
Set the delta RTD value to 0.00385.
Set the zero RTD value to 120.
Section 6: SCPI command reference
Default value
1.4999
VOLTage[:DC]:RATio
DIGitize:VOLTage
DIGitize:CURRent
6-99