Beeper.beep() - Keithley DMM7510 Reference Manual

Section 8: TSP command reference
Example
acal.schedule(acal.ACTION_RUN, acal.INTERVAL_1DAY, 8)
Sets auto calibration to run every day at 8 am.
Also see
Auto calibration
acal.run() (on page 8-12)

beeper.beep()

This function generates an audible tone.
Type TSP-Link accessible
Function Yes
Usage
beeper.beep(duration, frequency)
duration
frequency
Details
You can use the beeper of the instrument to provide an audible signal at a specific frequency and
time duration.
Using this function from a remote interface does not affect audible errors or key click settings that
were made from the Model DMM7510 front panel.
Example
beeper.beep(2, 2400)
Also see
None
8-14
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
(on page 3-44)
Affected by
The amount of time to play the tone (0.001 to 100 s)
The frequency of the beep (20 to 8000 Hz)
Where saved Default value
Generates a 2 s, 2400 Hz tone.
DMM7510-901-01 Rev. B / May 2015