Trigger:digital<N>:Out:logic - Keithley DMM7510 Reference Manual

Section 6: SCPI command reference
Example
TRIG:DIG1:IN:OVER?
Also see
Digital I/O port configuration
:DIGital:LINE<n>:MODE
:TRIGger:DIGital<n>:OUT:LOGic
This command sets the output logic of the trigger event generator to positive or negative for the specified line.
Type
Command and query
Usage
:TRIGger:DIGital<n>:OUT:LOGic <logicType>
:TRIGger:DIGital<n>:OUT:LOGic?
<n>
<logicType>
Details
This command sets the trigger event generator to assert a TTL pulse for output logic. Positive is a
high pulse; negative is a low pulse.
Example
:DIG:LINE4:MODE TRIG, OUT
:TRIG:DIG4:OUT:LOG NEG
Also see
:DIGital:LINE<n>:MODE
Digital I/O port configuration
6-206
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
(on page 3-49)
(on page 6-38)
Affected by
Recall settings
Instrument reset
Power cycle
Digital I/O trigger line (1 to 6)
The output logic of the trigger generator:
•
Assert a TTL-high pulse for output: POSitive
•
Assert a TTL-low pulse for output: NEGative
(on page 6-38)
(on page 3-49)
Returns 0 if no overruns have occurred or 1
if one or more overrun have occurred for I/O
line 1.
Where saved
Save settings
Sets line 4 mode to be a trigger output and
sets the output logic of the trigger event
generator to negative (asserts a low pulse).
DMM7510-901-01 Rev. B / May 2015
Default value
NEG