Keithley DMM7510 Reference Manual page 71

Section 2: General operation
Scale tab
The Scale tab allows you to set up boundaries, number of bins, and type of scaling used for the
histogram.
Setting
Minimum Boundary
Maximum Boundary
Number of Bins
Method
Views Reading Table menu
The Reading Table menu allows you to view data in the selected reading
buffer.
Setting
Buffer
Reading Preview
Graph
Table
Reading Details
2-44
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Description
The lowest value of the data that is binned in the histogram. Data
that is below this level is binned in the low outlier bin.
The highest value of the data that is binned in the histogram. Data
that is above this level is binned in the high outlier bin.
The number of bins in the histogram.
The histogram will create two outlier bins in addition to the bins
you define. These bins are used to collect data that is below or
above the defined minimum and maximum boundaries.
The method of autoscaling to use:
•
SmartScale: Automatically select the most appropriate
scaling method.
•
Auto Bin: Redistribute the data evenly in the bins based on
the present minimum and maximum boundaries.
•
Fit: Adjust the y-axis scale so that the tops of all bins are
visible
•
Off: Turn off autoscaling.
Description
Selects the reading buffer that contains the data you want to view.
If Active Buffer is selected, the data from reading buffer that is
presently storing readings is displayed.
Shows a small graph view of the data in the reading table. Touch a
data point in the graph to jump to that data point in the table.
Displays the data in the selected reading buffer. You can select a
data point to display additional detail about that data point.
Select a data point to open the Reading Details window for the
selected data point. The details describe the instrument settings
when the data point was read.
DMM7510-901-01 Rev. B / May 2015