Trace:statistics:minimum - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

:TRACe:STATistics:MINimum?

This command returns the minimum reading value in the reading buffer.
Type
Query only
Usage
:TRACe:STATistics:MINimum?
:TRACe:STATistics:MINimum? "<bufferName>"
<bufferName>
Example
TRACe:STAT:MINimum?
TRACe:STAT:MINimum? "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE
:TRACe:STATistics:AVERage?
:TRACe:STATistics:CLEar
:TRACe:STATistics:MAXimum?
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:STDDev?
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-defined buffer; if no
buffer is specified, defbuffer1 is used
(on page 3-13)
(on page 3-30)
(on page 6-160)
(on page 6-166)
(on page 6-167)
(on page 6-168)
(on page 6-170)
(on page 6-170)
Section 6: SCPI command reference
Where saved
Not applicable
Returns the minimum reading value in the default buffer
defbuffer1.
Returns the minimum reading value in the user-defined
buffer testData.
Default value
Not applicable
6-169