Keithley DMM7510 Reference Manual page 789

Section 8: TSP command reference
The following table lists the ranges for each function.
If the measurement function is...
DC voltage
AC voltage
DC current
AC current
2-wire resistance
4-wire resistance with offset
compensation off and dry circuit off
4-wire resistance with offset
compensation off and dry circuit on
4-wire resistance with offset
compensation on and dry circuit off
4-wire resistance with offset
compensation on and dry circuit on
Continuity
Diode
Capacitance
DC voltage ratio
Example
dmm.measure.func = dmm.FUNC_AC_VOLTAGE
dmm.measure.range = 90
print(dmm.measure.range)
Also see
dmm.digitize.range
dmm.measure.autorange
8-176
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
The available ranges are...
100 mV, 1 V, 10 V, 100 V, 1000 V
100 mV, 1 V, 10 V, 100 V, 700 V
10 µA, 100 µA, 1 mA, 10 mA, 100 mA, 1 A, 3 A
10 A available for rear terminals
1 mA, 10 mA, 100 mA, 1 A, 3 A
10 A available for rear terminals
10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ
1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ
1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 kΩ (fixed)
10 V (fixed)
1 nF, 10 nF, 100 nF, 1 µF, 10 µF, 100 µF, 1 mF
100 mV, 1 V, 10 V, 100 V, 1000 V
(on page 8-108)
(on page 8-134)
Set the range to 90 V, which selects the
100 V range.
Output:
100
DMM7510-901-01 Rev. B / May 2015