Keithley DMM7510 Reference Manual page 275

Section 3: Functions and features
Front-panel icon
3-92
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
SCPI command
TSP command
:TRIGger:BLOCk:DIGital:IO
trigger.model.setblock() — trigger.BLOCK_DIGITAL_IO
317)
:TRIGger:BLOCk:DIGitize (on page 6-197)
trigger.model.setblock() — trigger.BLOCK_DIGITIZE
318)
:TRIGger:BLOCk:LOG:EVENt
trigger.model.setblock() — trigger.BLOCK_LOG_EVENT
8-320)
:TRIGger:BLOCk:MEASure
trigger.model.setblock() — trigger.BLOCK_MEASURE
321)
:TRIGger:BLOCk:NOP (on page 6-200)
trigger.model.setblock() — trigger.BLOCK_NOP
:TRIGger:BLOCk:NOTify (on page 6-201)
trigger.model.setblock() — trigger.BLOCK_NOTIFY
:TRIGger:BLOCk:WAIT (on page 6-202)
trigger.model.setblock() — trigger.BLOCK_WAIT
(on page 6-196)
(on page 8-
(on page 6-198)
(on page 6-199)
(on page 8-
(on page 8-322)
(on page 8-323)
(on page 8-325)
DMM7510-901-01 Rev. B / May 2015
Block description
This trigger model
block that sets the
lines on the digital
(on page 8-
I/O port high or low
This defines a
trigger block that
makes a
measurement using
a digitize function
This allows you to
log an event in the
event log when the
(on page
trigger model is
running
This defines a
trigger block that
makes a
measurement using
a measure function
This creates a
placeholder that
performs no action
in the trigger
model; available
only using remote
commands
This defines a
trigger model block
that generates a
trigger event and
immediately
continues to the
next block
This defines a
trigger model block
that waits for an
event before
allowing the trigger
model to continue