How Do I Upgrade The Firmware; Where Can I Find Updated Drivers - Keithley DMM7510 Reference Manual

Section 9: Frequently asked questions (FAQs)

How do I upgrade the firmware?

Do not turn off power or remove the USB flash drive until the upgrade process is complete.
You can upgrade or downgrade the firmware from the front panel or from the virtual front panel.
Refer to Using the Model DMM7510 virtual front panel
From the front panel or virtual front panel:
1. Copy the firmware file (.upg file) to a USB flash drive.
2. Verify that the firmware file is in the root subdirectory of the flash drive and that it is the only
firmware file in that location.
3. Disconnect any terminals that are attached to the instrument.
4. Turn on instrument power.
5. Insert the flash drive into the USB port on the front panel of the instrument.
6. From the instrument front panel, press the MENU key.
7. Under System, select Info/Manage.
8. To upgrade to a newer version of firmware, select Upgrade to New.
9. To return to a previous version of firmware, select Downgrade to Older.
10. If the instrument is controlled remotely, a message is displayed. Select Yes to continue.
11. When the upgrade is complete, reboot the instrument.
A message is displayed while the upgrade is in progress.
For additional information about upgrading the firmware, see

Where can I find updated drivers?

For the latest drivers and additional support information, see the Keithley Instruments support
website.
To see what drivers are available for your instrument:
1. Go to the
2. Enter the model number of your instrument.
3. Select Software Driver from the list.
If you use the native LabVIEW
SCPI command set. For information on changing the command set, refer to
command set?
9-6
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Keithley Instruments support website
TM
or IVI driver, you must configure the Model DMM7510 to use the
(on page 9-7)
(on page 2-86) for information.
Upgrading the firmware
(http://www.keithley.com/support).
How do I change the
DMM7510-901-01 Rev. B / May 2015
(on page 4).