Keithley DMM7510 Reference Manual page 273

Section 3: Functions and features
Trigger block summary
Front-panel
icon
Not applicable
Not applicable
3-90
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
SCPI command
TSP command
:TRIGger:BLOCk:LIST? (on page 6-198)
trigger.model.getblocklist() (on page 8-284)
:TRIGger:BLOCk:BRANch:ALWays
trigger.model.setblock() — trigger.BLOCK_BRANCH_ALWAYS
page 8-303)
:TRIGger:BLOCk:BRANch:COUNter
trigger.model.setblock() — trigger.BLOCK_BRANCH_COUNTER
page 8-304)
:TRIGger:BLOCk:BRANch:COUNter:COUNt?
trigger.model.getbranchcount()
:TRIGger:BLOCk:BRANch:COUNter:RESet
trigger.model.setblock() — trigger.BLOCK_RESET_BRANCH_COUNT
(on page 8-324)
:TRIGger:BLOCk:BRANch:DELTa
trigger.model.setblock() — trigger.BLOCK_BRANCH_DELTA
8-305)
:TRIGger:BLOCk:BRANch:EVENt
trigger.model.setblock() — trigger.BLOCK_BRANCH_ON_EVENT
page 8-309)
:TRIGger:BLOCk:BRANch:LIMit:CONStant
trigger.model.setblock() —
trigger.BLOCK_BRANCH_LIMIT_CONSTANT
:TRIGger:BLOCk:BRANch:LIMit:DYNamic
trigger.model.setblock() —
trigger.BLOCK_BRANCH_LIMIT_DYNAMIC
(on page 6-181)
(on page 6-182)
(on page 6-183)
(on page 8-285)
(on page 6-183)
(on page 6-184)
(on page 6-185)
(on page 6-187)
(on page 8-306)
(on page 6-188)
(on page 8-308)
DMM7510-901-01 Rev. B / May 2015
Block description
This returns the
settings for all
trigger model
blocks
This defines a
trigger model block
that always goes to
(on
a specific block
This defines a
trigger model block
that branches to a
(on
specified block a
specified number of
times
This returns the
count value of the
trigger model
counter block
This creates a
block in the trigger
model that resets a
branch counter to 0
This defines a
trigger model block
that goes to a
(on page
specified block if
the difference of
two measurements
meets preset
criteria
This branches to a
specified block
when a specified
(on
trigger event occurs
This defines a
trigger model block
that goes to a
specified block if a
measurement
meets preset
criteria
This defines a
trigger model block
that goes to a
specified block in
the trigger model if
a measurement
meets user-defined
criteria