[:Sense[1]]:Configuration:list:catalog - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

[:SENSe[1]]:CONFiguration:LIST:CATalog?

This command returns the name of one measure configuration list that is stored on the instrument.
Type
Query only
Usage
[:SENSe[1]]:CONFiguration:LIST:CATalog?
Details
You can use this command to retrieve the names of measure configuration lists that are stored in the
instrument.
This command returns one name each time you send it. This command returns an empty string when
there are no more names to return. If the command returns an empty string the first time you send it,
no measure configuration lists have been created for the instrument.
Example
CONF:LIST:CAT?
Also see
Configuration lists
[:SENSe[1]]:CONFiguration:LIST:CREate
DMM7510-901-01 Rev. B / May 2015
Affected by
Not applicable
(on page 3-37)
(on page 6-116)
Where saved
Not applicable
Send this command to retrieve the name of one measure
configuration list. To get all stored lists, send it again until it
returns an empty string.
Section 6: SCPI command reference
Default value
Not applicable
6-115