System:eventlog:count - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

:SYSTem:EVENtlog:COUNt?

This command returns the number of unread events in the event log.
Type
Query only
Usage
:SYSTem:EVENtlog:COUNt?
:SYSTem:EVENtlog:COUNt? <eventType>
:SYSTem:EVENtlog:COUNt? <eventType>, <eventType>
<eventType>
Details
A count finds the number of unread events in the event log. You can specify the event types to return,
or return the count for all events.
This command reports the number of events that have occurred since the command was last sent or
since the event log was last cleared.
Example
:SYST:EVEN:COUN? ERR
Also see
:SYSTem:CLEar
:SYSTem:EVENtlog:NEXT?
:SYSTem:EVENtlog:SAVE
DMM7510-901-01 Rev. B / May 2015
Affected by
Not applicable
Limits the list of event log entries to specific types; set to:
•
Returns the number of errors: ERRor
•
Returns the number of warnings: WARNing
•
Returns the number of informational messages: INFormational
•
Returns all events: ALL
(on page 6-136)
(on page 6-142)
(on page 6-144)
Section 6: SCPI command reference
Where saved
Not applicable
Displays the present number of errors in the
instrument event log.
If there are three errors in the event log,
output is:
3
Default value
Not applicable
6-141