Tsp Commands; Acal.count - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

TSP commands

acal.count

This attribute returns the number of times automatic calibration has been run.
Type TSP-Link accessible
Attribute (R) Yes
Usage
value = acal.count
value
Details
The number of times that auto calibration has been run since the last factory calibration. The count
restarts at 1 after a factory calibration.
Example
print(acal.count)
Also see
Auto calibration
acal.run()
DMM7510-901-01 Rev. B / May 2015
Affected by
Not applicable
The number of times auto calibration has been run
(on page 3-44)
(on page 8-12)
Section 8: TSP command reference
Where saved Default value
Not applicable Not applicable
Returns the number of times auto calibration has been
run.
Example output:
15
8-7