Keithley DMM7510 Reference Manual page 130

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 2: General operation
Figure 64: Rear-panel connections: AC current measurement (3 A or less)
Figure 65: Rear-panel connections: AC current measurement (3 A or more)
Measure AC current using the front panel
To make an AC current measurement using the front panel:
1. Make the connections as shown in the previous figures.
2. Press the FUNCTION key.
3. Select AC Current.
4. Press the TRIGGER key for 2 seconds and verify that the instrument is set to Continuous
Measurement.
The measurements start displaying on the front panel.
When the TERMINALS switch is set to REAR and autorange is enabled, autoranging is limited to
ranges up to 3 A ranges. The 10 A range is not included in the autorange algorithm.
DMM7510-901-01 Rev. B / May 2015 2-103