System:eventlog:save - Keithley DMM7510 Reference Manual

Section 6: SCPI command reference

:SYSTem:EVENtlog:SAVE

This command saves the event log to a file on a USB flash drive.
Type
Command only
Usage
:SYSTem:EVENtlog:SAVE "<filename>"
:SYSTem:EVENtlog:SAVE "<filename>", <eventType>
<filename>
<eventType>
Details
This command saves all event log entries to a USB flash drive.
If you do not define an event type, the instrument saves all event log entries.
The extension .csv is automatically added to the file name.
Example
SYST:EVEN:SAVE "/usb1/July_error_log", ERR
Also see
:SYSTem:CLEar
6-144
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Affected by
Not applicable
A string that holds the name of the file to be saved
Limits the event log entries that are saved to specific types; set to:
•
ERRor: Saves only error entries
•
WARNing: Saves only warning entries
•
INFormational: Saves only informational entries
•
ALL: Saves all event log entries (default)
(on page 6-136)
Where saved
Not applicable
Saves the error events in the event log to a
file on the USB flash drive named
July_error_log.csv.
DMM7510-901-01 Rev. B / May 2015
Default value
Not applicable