Keithley DMM7510 Reference Manual page 62

7 1/2 digit graphical sampling multimeter

Hide thumbs Also See for DMM7510:

Table of Contents

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

Zero Reference

Limit 1 and Limit 2

DMM7510-901-01 Rev. B / May 2015

When the Math State is set to On, this setting specifies the

reference used when the math operation is set to percent; the

range is -1e12 to +1e12.

These settings enable or disable limit testing. The Limit options

allow you to do pass-or-fail limit testing using the front panel of the

instrument. When you do a limit test, the Home screen displays the

pass or fail result of the test.

Limit State enables or disables a limit test for the selected

measurement function. When testing is enabled, limit testing

occurs on each measurement. Limit testing compares the

measurements to the high and low limit values. If a measurement

is outside these limits, the test fails. If a measurement is in the

limits, it passes.

Displays the settings that are available for the limit functions.

Auto clear indicates if the high and low limits should be cleared

automatically or not.

The Low Value specifies the lower limit for limit tests.

The Limit High Level specifies the upper limit for a limit test.

Audible determines if the instrument beeper sounds when a limit

test passes or fails, or disables the beeper.

Section 2: General operation