[:Sense[1]]:<Function>:Bias:level - Keithley DMM7510 Reference Manual

Section 6: SCPI command reference
[:SENSe[1]]:<function>:BIAS:LEVel
This command selects the amount of current the instrument sources when it makes measurements.
Type
Command and query
Usage
[:SENSe[1]]:<function>:BIAS:LEVel <n>
[:SENSe[1]]:<function>:BIAS:LEVel DEFault
[:SENSe[1]]:<function>:BIAS:LEVel MINimum
[:SENSe[1]]:<function>:BIAS:LEVel MAXimum
[:SENSe[1]]:<function>:BIAS:LEVel?
[:SENSe[1]]:<function>:BIAS:LEVel? DEFault
[:SENSe[1]]:<function>:BIAS:LEVel? MINimum
[:SENSe[1]]:<function>:BIAS:LEVel? MAXimum
<function>
<n>
Functions
VOLTage[:DC]
VOLTage:AC
CURRent[:DC]
CURRent:AC
Details
Selects the amount of current that is sourced by the instrument to make measurements.
Example
DIOD:BIAS:LEVel 0.0001
Also see
[:SENSe[1]]:<function>:BIAS:ACTual?
6-74
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
Measure configuration list
The function to which the setting applies; see Functions
The bias level: 10 µA, 100 µA, or 1 mA
RESistance
FRESistance
DIODe
CAPacitance
(on page 6-73)
Where saved
Save settings
Measure configuration list
TEMPerature
CONTinuity
FREQuency[:VOLTage]
PERiod[:VOLTage]
For the diode functions, sets a bias level of
100 µA.
DMM7510-901-01 Rev. B / May 2015
Default value
10 µA
VOLTage[:DC]:RATio
DIGitize:VOLTage
DIGitize:CURRent