Section 6: SCPI command reference
:DISPlay:SCReen
This command changes which front-panel screen is displayed.
Type
Command only
Usage
:DISPlay:SCReen <screenName>
<screenName>
Example
DISP:CLE
DISP:SCR SWIPE_USER
DISP:USER1:TEXT "Batch A122"
DISP:USER2:TEXT "Test running"
Also see
None
6-46
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Affected by
Not applicable
The screen to display:
•
Home screen: HOME
•
Home screen with large readings: HOME_LARGe_reading
•
Reading table: READing_table
•
Graph screen (opens last selected tab): GRAPh
•
Histogram screen: HISTogram
•
FUNCTIONS swipe screen: SWIPE_FUNCtions
•
GRAPH swipe screen: SWIPE_GRAPh
•
SECONDARY swipe screen: SWIPE_SECondary
•
SETTINGS swipe screen: SWIPE_SETTings
•
STATISTICS swipe screen: SWIPE_STATistics
•
USER swipe screen: SWIPE_USER
Where saved
Not applicable
Clear and display the USER swipe screen.
Set the first line to read "Batch A122" and
the second line to display "Test running".
DMM7510-901-01 Rev. B / May 2015
Default value
Not applicable