Keithley DMM7510 Reference Manual page 590

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Where:
•
myFunction: The name of the function.
•
parameterX: Parameter names. To use multiple parameters, separate the names with commas.
•
functionBody: The code that is executed when the function is called.
To execute a function, substitute appropriate values for parameterX and insert them into a message
formatted as:
myFunction(valueForParameterX, valueForParameterY)
Where valueForParameterX and valueForParameterY represent the values to be passed to
the function call for the given parameters.
The output you get from these examples will vary depending on the data format settings of the
instrument.
Example 1
function add_two(first_value,
second_value)
return first_value + second_value
end
print(add_two(3, 4))
Example 2
add_three = function(first_value,
second_value, third_value)
return first_value + second_value +
third_value
end
print(add_three(3, 4, 5))
Example 3
function sum_diff_ratio(first_value,
second_value)
psum = first_value + second_value
pdif = first_value - second_value
prat = first_value / second_value
return psum, pdif, prat
end
sum, diff, ratio = sum_diff_ratio(2, 3)
print(sum)
print(diff)
print(ratio)
DMM7510-901-01 Rev. B / May 2015
Section 7: Introduction to TSP commands
Creates a variable named add_two that
has a variable type of function.
Output:
7
Creates a variable named add_three
that has a variable type of function.
Output:
12
Returns multiple parameters (sum,
difference, and ratio of the two numbers
passed to it).
Output:
5
-1
0.66666666666667
7-19