Idn - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

*IDN?

This command retrieves the identification string of the instrument.
Type
Query only
Usage
*IDN?
Details
The identification string includes the manufacturer, model number, serial number, and firmware
revision of the instrument. The string is formatted as follows:
KEITHLEY INSTRUMENTS,MODEL nnnn,xxxxxxxx,yyyyyy
Where:
•
nnnn is the model number
•
xxxxxxxx is the serial number
•
yyyyyy is the firmware revision level
Example
*IDN?
Also see
System information
*LANG
This command determines which command set is used by the instrument.
Type
Command and query
Usage
*LANG <commandSet>
*LANG?
<commandSet>
Details
The remote command sets that are available include:
•
SCPI: An instrument-specific language built on the SCPI standard.
•
TSP: A scripting programming language that contains instrument-specific control commands that
can be executed from a stand-alone instrument. You can use TSP to send individual commands
or use it to combine commands into scripts.
DMM7510-901-01 Rev. B / May 2015
Affected by
None
Output:
KEITHLEY INSTRUMENTS,MODEL DMM7510,01234567,1.0.0i
(on page 2-90)
Affected by
Not applicable
The command set to be used:
•
TSP
•
SCPI
Where saved
Not applicable
Where saved
Nonvolatile memory
Appendix 0: Common commands
Default value
Not applicable
Default value
SCPI
5