Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
After selecting a trigger model template, you can view the trigger model blocks in a graphical format
by pressing the front-panel MENU key and under Trigger, selecting Configure. You can also add or
delete blocks and change trigger model settings from this screen. You can use the
trigger.model.getblocklist() command to view the trigger model blocks in a list format.
Example
Refer to the application notes for the Model DMM7510 on the
http://www.keithley.com
Also see
None
DMM7510-901-01 Rev. B / May 2015
for an example with additional detail about this command.
Section 8: TSP command reference
Keithley Instruments website
8-293