Sense1 Subsystem; [:Sense[1]]:<Function>:Aperture - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

SENSe1 subsystem

The SENSe1 subsystem commands configure and control the measurement functions of the
instrument.
Many of these commands are set for a specific function. For example, you can program a range
setting for each function. The settings are saved with that function.
[:SENSe[1]]:<function>:APERture
This command determines the aperture setting for the selected function.
Type
Command and query
Usage
[:SENSe[1]]:<function>:APERture <n>
[:SENSe[1]]:<function>:APERture DEFault
[:SENSe[1]]:<function>:APERture MINimum
[:SENSe[1]]:<function>:APERture MAXimum
[:SENSe[1]]:<function>:APERture?
[:SENSe[1]]:<function>:APERture? DEFault
[:SENSe[1]]:<function>:APERture? MINimum
[:SENSe[1]]:<function>:APERture? MAXimum
<function>
<n>
Functions
VOLTage[:DC]
VOLTage:AC
CURRent[:DC]
CURRent:AC
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
Measure configuration list
The function to which the setting applies; see Functions
The time of the aperture; see Details
RESistance
FRESistance
DIODe
CAPacitance
Where saved
Save settings
Measure configuration list
TEMPerature
CONTinuity
FREQuency[:VOLTage]
PERiod[:VOLTage]
Section 6: SCPI command reference
Default value
See Details
VOLTage[:DC]:RATio
DIGitize:VOLTage
DIGitize:CURRent
6-53