Dmm.digitize.limit[Y].Enable - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

dmm.digitize.limit[Y].enable

This attribute enables or disables a limit test on the measurement from the selected measure function.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = dmm.digitize.limit[Y].enable
dmm.digitize.limit[Y].enable = state
state
Y
Functions
dmm.FUNC_DC_VOLTAGE
dmm.FUNC_AC_VOLTAGE
dmm.FUNC_DC_CURRENT
dmm.FUNC_AC_CURRENT
dmm.FUNC_TEMPERATURE
Details
This command enables or disables a limit test for the selected measurement function. When this
attribute is enabled, the limit Y testing occurs on each measurement made by the instrument. Limit Y
testing compares the measurements to the high and low limit values. If a measurement falls outside
these limits, the test fails.
Example
This example enables limits 1 and 2 for digitize voltage measurements. Limit 1 is checking for
readings to be between 3 and 5 V, while limit 2 is checking for the readings to be between 1 and 7 V.
The auto clear feature is disabled, so if any reading is outside these limits, the corresponding fail is 1.
Therefore, if any one of the fails is 1, analyze the reading buffer data to find out which reading failed
the limits.
DMM7510-901-01 Rev. B / May 2015
Affected by Where saved
Restore configuration Configuration script
Instrument reset Measure configuration list
Power cycle
Measure configuration list
Limit Y testing:
•
Disable: dmm.OFF
•
Enable: dmm.ON
Limit number: 1 or 2
dmm.FUNC_RESISTANCE
dmm.FUNC_4W_RESISTANCE
dmm.FUNC_DIODE
dmm.FUNC_CAPACITANCE
dmm.FUNC_CONTINUITY
Section 8: TSP command reference
Default value
dmm.OFF
dmm.FUNC_ACV_FREQUENCY
dmm.FUNC_ACV_PERIOD
dmm.FUNC_DCV_RATIO
dmm.FUNC_DIGITIZE_CURRENT
dmm.FUNC_DIGITIZE_VOLTAGE
8-95