Trigger:digital<N>:Out:pulsewidth - Keithley DMM7510 Reference Manual

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
:TRIGger:DIGital<n>:OUT:PULSewidth
This command describes the length of time that the trigger line is asserted for output triggers.
Type
Command and query
Usage
:TRIGger:DIGital<n>:OUT:PULSewidth <width>
:TRIGger:DIGital<n>:OUT:PULSewidth?
<n>
<width>
Details
Setting the pulse width to zero (0) seconds asserts the trigger indefinitely.
Example
DIG:LINE1:MODE TRIG, OUT
TRIG:DIG1:OUT:PULS 2
Also see
:DIGital:LINE<n>:MODE
:DIGital:WRITe <n>
Digital I/O port configuration
DMM7510-901-01 Rev. B / May 2015
Affected by
Recall settings
Instrument reset
Power cycle
Digital I/O trigger line (1 to 6)
Pulse length (0 to 100,000 s)
(on page 6-38)
(on page 6-42)
(on page 3-49)
Section 6: SCPI command reference
Where saved
Save settings
Set digital line 1 to trigger out.
Set the pulse to 2 s.
Default value
10e-6 (10 µs)
6-207