Power Protection Programming Commands - Pacific Power Source LMX Series Operation Manual

8.7.9

Power Protection Programming Commands

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]POWer:LIMit#
This command sets the programmable true power limit level in kW
for phase #. If # is omitted, all available phases are set to the value
specified. The max available power for a phase can be obtained using
the [SOURce:]POWer:LIMit#:MAX? query command.
Limit value in kW
<nr2>
POW:LIM 2.5
[SOURce:]POWer:LIMit#?
<nr2>
POW:LIM1?
2.5000
[SOURce:]POWer:LIMit#:MAX?
Returns maximum available true power capability for the specified
phase # in kW. If # is omitted, returns maximum available power level
for all phases. Typically, this value will be the same for all phases.
<nr2>
POW:LIM1:MAX?
5.0000
[SOURce:]KVA:LIMit#
This command sets the programmable apparent power limit level in
kVA for phase #. If # is omitted, all available phases are set to the
value specified. The max available apparent power for a phase can be
obtained using the [SOURce:]KVA:LIMit#:MAX? query command.
Limit value in kVA
<nr2>
KVA:LIM 2.5
[SOURce:]KVA:LIMit#?
<nr2>
POW:LIM1?
2.5000
[SOURce:]KVA:LIMit#:MAX?
Returns maximum available apparent power capability for the
specified phase # in kVA. If # is omitted, returns maximum available
apparent power levels for all phases. Typically, this value will be the
same for all phases.
<nr2>
KVA:LIM1:MAX?
5.0000
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 272 of 463