Pacific Power Source LMX Series Operation Manual page 18

CAUTION: USE COPPER CONDUCTOR WIRING ONLY
Use only copper conductor (CU) wiring for all AC Input, AC Output and Ground Connections.
Utilisez uniquement un câblage à conducteur en cuivre (CU) pour toutes les connexions d'entrée
CA, de sortie CA et de mise à la terre.
CAUTION: BEFORE APPLYING POWER
Verify that the product AC input specifications noted on the model tag matches the available
utility line voltage and frequency.
ATTENTION: AVANT DE METTRE SOUS TENSION
Vérifier que les spécifications de tension d´alimentation de l´équipement notées sur l´étiquette
sont bien compatibles avec la tension et fréquence secteur disponibles.
SAFETY NOTICE: GROUNDING
This product is a Safety Class 1 instrument (provided with a protective earth terminal). To
minimize shock hazard, the instrument chassis or cabinet must be connected to an electrical
safety ground. The instrument must be connected to the AC power supply mains through a
properly rated three phase power cable with protective earth (L1-L2-L3-E). Any interruption of
the protective (grounding) conductor or disconnection of the protective earth terminal will cause
a potential shock hazard that could result in personal injury.
This instrument may be equipped with a line filter to reduce electromagnetic interference and
must be properly grounded to minimize electric shock hazard. Operation at line voltages or
frequencies in excess of those stated on the model type plate may cause leakage currents in
excess of 5.0 mA peak.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
ATTENTION: UTILISER UNIQUEMENT LE CÂBLAGE DU
CONDUCTEUR EN CUIVRE
LMX SERIES® OPERATION MANUAL
Safety & Warranty Information
SECTION 2:
Page 18 of 463