Table of Contents
Advertisement
Query Format
Description
Parameters
Returned Data Format
Query Example
Query Format
Description
Parameters
Returned Data Format
Query Example
Query Format
Description
Parameters
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
PROGram[:SELected]:SST? [,<nr1>] [,<cr>]
This command returns the Steady State Table settings of the selected
program only. The transient table data is not returned.
Option: PROGRAM NUMBER [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
<cr>
PROG:SST? 2, USB
-> steady state table program data
PROGram:EXECuted:SST? [,<nr1>] [,<cr>]
This command returns the Steady State Table settings of the
executing program only. The transient table data is not returned.
Option: PROGRAM NUMBER [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
<cr>
PROG:EXEC:SST?
-> steady state table program data
PROGram[:SELected]:TT? [,<nr1>] [,<cr>]
This command returns the Transient Table settings of the selected
program only. The steady state table data is not returned.
Option: STYLE [,<nr1]
0 = Human readable Style A (default if omitted)
1 = Human readable Style B
2 = Binary Data Format. Can be more useful to search for differences
between programs.
See PROGram:TT? Command for formats
Option: PROGRAM NUMBER [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
<cr>
PROG:TT? 1
-> transient table program data
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 233 of 463
Advertisement
Table of Contents
