Table of Contents
Advertisement
6.8.9
EXTERNAL STORAGE MANAGEMENT Screen
The LMX Series® is able to use a wide variety of external storage devices such as USB
memory stick and SD-Cards in addition to its internal storage memory. These devices may be
used to store data, program setups, transients etc.
Program storage memory defaults to INTERNAL but can be changed to any available
(inserted and mounted) external memory device if needed. The first parameter field is used
to make this selection.
If any external memory devices are inserted, they will appear in the "External memories"
field at the bottom of this screen.
Note: Maximum supported external memory device storage size is 32 GBytes.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Figure 6-34: EXTERNAL STORAGE MANAGMENT Screen
LMX SERIES™ OPERATION MANUAL
Front Panel Operation
SECTION 6:
Page 173 of 463
Advertisement
Table of Contents
