Table of Contents
Advertisement
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]STEP:REPeat <no, opt>
This command sets the number of repeat times for the ramp of the
step
No of repeats, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr1>, <cr>
STEP:MODE:REP 100
[SOURce:]STEP:REP?
<nr2>
STEP:REP?
100, NOR
[SOURce:]STEP:REPeat:MINimum?
This command returns lowest permissible set value for the STEP
length time setting.
<nr1>
STEP:REP:MIN?
0
[SOURce:]STEP:REPeat:MAXimum?
This command returns highest permissible set value for the STEP
length time setting.
<nr1>
STEP:REP:MAX?
65535
[SOURce:]STEP:REPeat:DEFault?
This command returns default set value for the STEP length time
setting.
<nr2>
STEP:REP:DEF?
1
[SOURce:]STEP:COUNT <no, opt>
This command sets the number of steps count.
No of step count, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr1>, <cr>
STEP:MODE:REP 12
[SOURce:]STEP:COUNT?
<nr2>
STEP:REP?
12, NOR
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 285 of 463
Advertisement
Table of Contents
