Pacific Power Source LMX Series Operation Manual page 305

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]PULSe:PHASe# < nr2 >, <cr>
This command sets the initial PULSE phase angle for selected phase #
number. Only phase 2 (B) and 3 (C) are allowed.
Phase No., < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr1>, <cr>
PULS:PHAS1 245.0
[SOURce:]PULSe:PHASe#?
<nr1>, <cr>
PULS:PHAS1?
245.0000
[SOURce:]PULSe:PHASe#:MINimum?
This command returns the minimum permissible set value of the
initial PULSE phase angle for selected phase #
<nr1>
PULS:PHAS1:MIN?
0.0000
[SOURce:]PULSe:PHASe#:MAXimum?
This command returns the maximum permissible set value of the
initial PULSE phase angle for selected phase #
<nr1>
PULS:PHAS1:MAX?
360.000
[SOURce:]PULSe:PHASe#:DEF?
This command returns the default set value of the initial PULSE phase
angle for selected phase #
<nr1>
PULS:PHAS2:DEF?
120.0000
PULS:PHAS3:DEF?
240.0000
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 305 of 463