Pacific Power Source LMX Series Operation Manual page 386

10.7.3.1 LIST Transients
For LIST transients, both STEP mode and SEGMENT mode is supported. The bottom part of the
screen shows the editable transient table. Execution controls are located in the top part of the
screen.
Data entry mode can be selected as either STEP or SEGMENT. Dwell times can be entered using
msec (TIME BASED) or cycles (CYCLE BASED). A sample TIME BASED Segment mode list is shown
below.
During transient execution, a progress indicator is visible showing percent completion.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
LMX SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
Page 386 of 463