Product Overview; General Description; Available Lmx Models - Pacific Power Source LMX Series Operation Manual

3

Product Overview

This chapter provides an overview of the PPS LMX Series® programmable power sources. It
introduces the reader to general operating characteristics of these power supplies.

3.1 General Description

The Pacific Power Source (PPS) LMX Series® power source is designed to provide accurate,
stable and clean AC power to a unit under test.
This series of programmable AC power sources features models with power ratings from
500 VA to 6000 VA with paralleling capability to 30kVA. All systems are designed to fit into a
standard 19-inch rack. These systems are suitable for use as frequency changers as well as
sophisticated test power generators.
All systems are configured with and advanced high performance controller that offers full
programmability of the AC power source. This controller allows control of voltage and
frequency and also allows the user to simulate virtually any transient (including sub-cycle
waveform disturbance) required for testing today's modern electronic equipment.
The LMX controller is also equipped with a high performance single or three phase power
analyzer with deep acquisition memory for measurement and waveform capture of output
parameters.
The standard output voltage range for most of the LMX-Series is 0-135 Vac L-N.
Additionally, Models 112LMX and 312LMX can operate from 0 to 150 Vac L-N.
Optional output transformers are available to provide higher output voltages. Voltage ratios
up to 2.5:1 are readily available. Other transformer ratios are available by special order.
The PPS LMX Series® power supply can be operated from the front panel (manual mode) or
using RS232, USB,LAN (Ethernet) or GPIB remote control.

3.2 Available LMX Models

Model 105LMX - 500 VA, capable of 1 or 2 Phase operation. Single-phase output voltage
range is 0-135 Vac L-N. Output voltage in two Phase Mode is 0-270 Vac L-L. An internal
output transformer option is available for higher voltages.
1. Model 108LMX - 750 VA, capable of 1 or 2 Phase operation. Single-phase output
voltage range is 0-135 Vac L-N. Output voltage in 2 Phase Mode is 0-270 Vac L-L.
Internal output transformer option available for higher voltages.
2. Model 112LMX - 1.2 kVA, capable of 1 or 2 Phase operation. Single-phase output
voltage range is 0-150 Vac L-N. Output voltage in 2 Phase Mode is 0-300 Vac L-L.
Additional ranges available with custom external transformer configurations.
3. Model 140LMX – 4.0 KVA, capable of 1 or 2 Phase operation. Single-phase output
voltage range is 0-135 Vac L-N. Output voltage in 2 Phase Mode is 0-270 Vac L-L.
External Magnetics Module available for higher output voltage ranges.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
LMX SERIES™ OPERATION MANUAL
SECTION 3: Product Overview
Page 22 of 463