Table of Contents
Advertisement
6.6.11 PULSE Parameters
Pulse transients can be used to create repetitive events for endurance testing of AC and DC
powered products.
The following parameters are available in a PULSE VALUES screen.
PARAMETER
Frequency
Voltage AC
Waveform
Phase
The following soft keys are available on the PULSE VALUES screen.
SOFT KEY
Use Setpoint (SK1)
Run Screen(SK2)
Link Phases (SK3)
Example (SK4)
Back (SK5)
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Range
15 ~ 1200
0 ~ 300
1 ~ 200
0.0 ~ 359.9
Table 6-17: Available STEP Transient Parameters
Description
Starts the transient from the "Run from step#" row number
Displays the PULSE EXECUTION screen.
Toggles between phase A, B, C or Coupled ABC
Displays a graphical representation of the STEP parameters
Returns to previous screen
Table 6-18: Available STEP PROGRAM screen soft keys
LMX SERIES™ OPERATION MANUAL
SECTION 6:
Unit
Description
Hz
Frequency
Vrms
AC Voltage
Waveform number
Deg
Phase angle for phases B & C
Front Panel Operation
Page 133 of 463
Advertisement
Table of Contents
