Access Control - Pacific Power Source LMX Series Operation Manual

10.3 Access Control

Since the power source is capable of producing hazardous voltages at its output terminals,
remote operation of the product over a LAN connection or any other available remote control
interface can be restricted by the user to include only monitoring functions rather than full
programming controls.
This feature is provided to ensure the safety of anyone near the unit in its actual physical
location. This access control mechanism requires granting specific access to certain functions
and features from the front panel by a person present at the location of the power source and
requesting permission first trying to access a unit remotely.
These access control functions can be set from the SYSTEM Menu, INTERFACE screen or via the
webserver using any browser.
All LMX Units are shipped from the factory with ACCESS CONTROL DISABLED. It is the
instrument's owner's responsibility to enable these features.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
WARNING
LMX SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
Page 374 of 463