Pacific Power Source LMX Series Operation Manual page 439

Error Source Code
Front panel -256
Front panel -253
Front panel -240
Front panel -224
Front panel -222
Front panel -221
Front panel -203
Front panel -158
Front panel -138
Front panel -131
Front panel -113
Front panel -109
Front panel -108
Front panel -103
Front panel -102
Front panel 18
Front panel 19
Front panel 21
Front panel 22
Front panel 29
Front panel 31
Front panel 32
Front panel 33
Front panel 34
Front panel 35
Front panel 36

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Category Error Message
SCPI error Execution error: File not
found.
SCPI error Execution error: Media is
corrupted.
SCPI error Execution error:
Hardware error.
SCPI error Execution error: Illegal
parameter value.
SCPI error Execution error:
Argument out of range.
SCPI error Execution error: Conflict
in configuration setting.
SCPI error Execution error:
Permission denied.
SCPI error Command error: String
data is not allowed.
SCPI error Command error: Numeric
suffix is invalid.
SCPI error Command error: Numeric
suffix is out of range.
SCPI error Command error:
Undefined header.
SCPI error Command error: Invalid
number of parameters.
SCPI error Command error:
Parameters error.
SCPI error Command error: Invalid
separator.
SCPI error Command error: Syntax
error.
Error Unavailable transient
element.
Error Maximum number of
transient elements.
Error Internal communication:
error during SDO upload.
Error Internal communication:
error during SDO
download.
Error USB interface unknown
state.
Error Interface request packet.
Error Interface request packet.
Error Interface request packet.
Error Interface request packet
out of space.
Error Interface request packet.
Error Interface request packet
has invalid arguments.
LMX SERIES™ OPERATION MANUAL
SECTION 12: Warnings & Error Messages
Possible Cause
File specified does not
exist
Media used has been
corrupted
Unspecified Hardware
Error detected. Cause
unknown
Invalid parameter value
Argument passed exceeds
allowable range
Configuration setting
conflict
Read or Write access to
memory selected denied.
Some memory areas are
off limits
Passing string data when
string type is not
supported
Number suffix not valid
Suffix number passed
exceeds allowable range
Command Header not
defined
Invalid number of
parameters. Too few or
too many parameters are
being passed
Errors in parameters
Separator used is invalid
Syntax Error
Resolution
Check for correct file
name
Reformat or replace
media
Try recycling power. If
error persists, contact
customer service
Check value
Adjust parameter to be
within valid range
Check configuration
settings
Check memory type or
permissions
Pass correct data type
Check value
Adjust suffix to be within
valid range
Check command
Check for correct no. of
parameters
Check parameter values
Use correct separator
character
Check syntax
Page 439 of 463